“”

4" Max Seal, Table Top Thermal Impulse Sealer Repair Kit

24 Volts, DC, 37.5 CFM, Square Tube Axial Fan;0.13 Amp Rating, 2,700 to 3,000 RPM, 3.15" High x 3.15" Wide x 1" Deep

1/8" Thick, Round Cross Section, Shore 70, -40 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.|Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

28.5mm, 3MT 118° Point High Speed Steel Taper Shank Drill Bit - Oxide Finish, 175mm Flute Length, 296mm OAL, Spiral Flute

Schedule 80, 1" Diam x 4" Long Black Pipe Nipple; Seamless

3/8-24 UNF Grade 8 Hex Lock Nut with Nylon Insert - 9/16" Width Across Flats, 15/32" High, Zinc Yellow Dichromate Finish

1/2-13 UNC, 1" OAL, Knurled Cup Point Set Screw Grade 8 Alloy Steel, 1/4" Key

4 Piece, 2, 2-3/8, 3, 4 Inch Base Length, 2, 3, 4, 6 Inch Blade Length, Square Set Steel, Includes 4 Pc. Set of 2-6 Inches

#10-32 UNF, 1/4" OAL, Knurled Cup Point Set Screw Grade 8 Alloy Steel, 3/32" Key

12" Max Seal, Table Top Thermal Impulse Sealer Repair Kit

Schedule 40, 1/4" Diam x 12" Long Steel Black Pipe Nipple; Threaded

1/4-20, Electropolished Finish, Stainless Steel Wire Turned Closed Eye Bolt - 2" Thread Length, 15/32" ID x 29/32" OD, 3-19/32" Shank Length

1/4 x 1/4" Shank, Lead Angle Turning Single Point Tool Bit, BL-4, Grade C6

3" Inside Diam x 3-3/4" Outside Diam Lip Seal - Standard 3/8" High, Polyurethane

5/16" Screw, 1-1/2" Length Under Head, Steel, Hex Head Lag Screw - Zinc Plated, Grade 2

M8x1.25 Metric Coarse Hex Low Socket Cap Screw;Grade 10.9 Alloy Steel, Black Oxide, Fully Threaded

0.0930 Inch Diameter, Lead Free Solid Wire Solder, 1 Lb., 13 Gauge

6" Long Red Nylon Standard Cable Tie

1,200 Lb Capacity, 24" Wide x 36" Long x 37" High Service Cart: Steel, Gray, 2 Shelves

7 Piece 1/4-20 Steel Transfer Screw Set -

Schedule 40, 1/8" Diam x 5" Long Steel Black Pipe Nipple; Threaded

Schedule 160, 2" Diam x 6" Long Black Pipe Nipple; Threaded

3/8-16 UNC, 3/4" Length Under Head Hex Head Cap Screw;Grade 316 Stainless Steel, 9/16" Hex

3 Operator, Pushbutton Control Station Up-Down-Stop (Legend), Momentary Switch, NO/NC Contact, NEMA 1