“”

M6x1.00 to M18x1.50 Tap, Metric Coarse, Metric Fine, NPT, UNC, UNF, Tap and Die Set - Carbon Steel, Carbon Steel Taps, Adjustable, 110 Piece Set with Metal Case

1/4" Thick, Durometer 90 DURO O-RING, -40 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.

24 Volts, DC, 37.5 CFM, Square Tube Axial Fan;0.13 Amp Rating, 2,700 to 3,000 RPM, 3.15" High x 3.15" Wide x 1" Deep

4" Max Seal, Table Top Thermal Impulse Sealer Repair Kit

28.5mm, 3MT 118° Point High Speed Steel Taper Shank Drill Bit - Oxide Finish, 175mm Flute Length, 296mm OAL, Spiral Flute

3/8-24 UNF Grade 8 Hex Lock Nut with Nylon Insert - 9/16" Width Across Flats, 15/32" High, Zinc Yellow Dichromate Finish

Radial/Deep Groove Ball Bearing - Straight Bore, 0.3750 in ID, 0.8750 in OD, 0.2812 in Width, Without Snap Ring

1/8" Thick, Round Cross Section, Shore 70, -40 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.|Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Schedule 40, 1/4" Diam x 12" Long Steel Black Pipe Nipple; Threaded

1/2-13 UNC, 1" OAL, Knurled Cup Point Set Screw Grade 8 Alloy Steel, 1/4" Key

#10-32 UNF, 1/4" OAL, Knurled Cup Point Set Screw Grade 8 Alloy Steel, 3/32" Key

12" Max Seal, Table Top Thermal Impulse Sealer Repair Kit

1/4-20, Electropolished Finish, Stainless Steel Wire Turned Closed Eye Bolt - 2" Thread Length, 15/32" ID x 29/32" OD, 3-19/32" Shank Length

6" Long Red Nylon Standard Cable Tie

1/4 x 1/4" Shank, Lead Angle Turning Single Point Tool Bit, BL-4, Grade C6

5/8 x 5/8" Shank, Pointed Nose Single Point Tool Bit, D-10, Grade C6

3" Inside Diam x 3-3/4" Outside Diam Lip Seal - Standard 3/8" High, Polyurethane

0.0930 Inch Diameter, Lead Free Solid Wire Solder, 1 Lb., 13 Gauge

7 Piece 1/4-20 Steel Transfer Screw Set -

3/16" Oval Compression Sleeve - Aluminum

1" Inside Diam x 1-1/2" Outside Diam Buna-N U-Cup 1/4" High, Nitrile

3/32" Thick, Round Cross Section, Shore 70, -40 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.|Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

5/16 Inch Pilot Diameter, Drill Chuck Key No. K3

5/8-18 UNF, 4 Flute, Bottoming, Plug & Taper, Bright Finish, High Speed Steel Tap Set - Right Hand Cut, 3-13/16" OAL, 1-13/16" Thread Length