“”

8" Long Red Nylon Standard Cable Tie

4 Piece High Speed Steel Hand Deburring Tool Set;Blade Type B10, B20, Holder Type B, For Hole Edges, Straight Edges

1,200 Lb Capacity, 24" Wide x 36" Long x 34-5/8" High Service Cart: Steel, Gray, 2 Shelves

8" Long Black Nylon Standard Cable Tie

48 Wide x 24-3/16 Deep x 28-5/16 High Job Site Box - Steel, Blue

12 Piece Swiss Pattern File Set;6-1/4" Long, 2 Coarseness, Round Handle, Set Includes Barrette, Crossing, Equalling, Flat, Half Round, Knife, Round, Round Edge Joint, Slitting, Square, Three Square

9/16 to 1-1/4", 118° Point, Oxide Finish, High Speed Steel Reduced Shank Drill Bit Set;10 Piece, Standard Point, 1/2" Shank Diam, Series 301

90° Head Angle, 1/4-28 Steel Standard Grease Fitting9.53mm Hex

5/16-18, 1-1/2" OAL, 1-3/16" Head Diam, Steel Elevator Bolt - Uncoated, Fanged Head, UNC Thread, Grade 2

4,000 Lbs. Load Capacity Horizontal Plate Clamp - 1.77 Inch Max Grip and 4 Inch Throat Depth

M3x0.50 Stainless Steel Right Hand Hex Nut;5.5mm Across Flats, 2.4mm High, Uncoated

SAE Size 28, 1-1/4 to 2-1/4" Diam, Stainless Steel/Carbon Steel Worm Drive Clamp - 1/2" Wide, Material Grade 201

5/32" 118° 2-Flute High Speed Steel Extra Length Drill Bit;Oxide Finish, 5-1/2" Flute Length, 8" OAL

250 Micron, Size 8, 75 GPM Max Flow, Liquid Bag Filter 5.5 Inch Diameter, 20 Inch Long, 2 Sq. Ft.

28 Piece, 3/32 to 17/32", Transfer Punch Set Round Shank, Comes in Stand

2" Galvanized Malleable Iron Pipe 90° Street ElbowThreaded Ends, 300 Liquid & Gas psi, 150 Steam psi

Garden Hose Noninsulated Pistol Nozzle;Zinc

EN10 Bi-Directional High Speed Steel Deburring Swivel Blade;Bi-Directional Deburring Blade

MIG Welder Liner -

RNG32 Grade I22 Carbide Turning Insert - Uncoated, Round, 3/8" Inscr Circle, 1/8" Thick

2" PVC Plastic Pipe End Cap Schedule 40, Slip End Connections

30" Long x 30" Wide x 3/16" Thick, Aramid Sheet Gasketing 1,450 Max psi, Green

3/8-16, 1-1/2" OAL, 1-5/16" Head Diam, Steel Elevator Bolt - Uncoated, Flat Head, UNC Thread, Grade 2

M3 Screw, 18-8 Stainless Steel Fender Flat Washer 3.2mm ID x 9mm OD, Plain Finish