“”

M6x1x11 Thread, 1" Diam, 15/16" High, Female Insert Ball Knob; Black, Phenolic, Smooth Grip, 11mm Hole Depth

5-1/2" Jaw Width x 6" Jaw Opening Capacity, 3-3/4" Throat Depth, Bench & Pipe Combination Vise; 1/8 to 3" Pipe Capacity, Swivel Base, Bolt Down Attachment, Ductile Iron

375 Lb Capacity, Horizontal, J Hook, Right Flanged Base, Stainless Steel Pull Action Latch Clamp 4" Drawing Movement, 8.82" OAL, Thumb Handle

3/8" Diam x 2-1/2" Pin Length C-1215 Case Hardened Steel Pull Out Dowel Pin - 1 Beveled & 1 Threaded End

3/4" ID x 1-3/8" OAL, Steel, Die & Mold Shoulder Bushing - Shoulder, 1-1/8" Bottom OD, 1.302" Top OD

5/8" Screw, Steel Fender Flat Washer 11/16" ID x 2-1/2" OD, 1/4" Thick, Zinc-Plated Finish

1" Head, Knurled Knob Tapped Thru, Stainless Steel

M8 Carbon Steel Cap Tip Clamp Spindle Assembly; 1-1/2" Thread Length, 2.09" OAL, 0.83" Tip Surface Diam, Use with Toggle Clamps

3/8-16 Hole, 7/8" Deep Hole, Phenolic, Threaded Hole Fluted Tapered Knob;2-41/64 OAL, 21/32" Base Diam, Black, 7/8" Head Diam

500 Lb Capacity, Vertical, U Hook, Flanged Base, Carbon Steel Pull Action Latch Clamp 1.53" Drawing Movement, 3.35" OAL, Straight Handle

3/4-10 4" OAL Equal Double Threaded Stud - Stainless Steel, Black Oxide Finish, 1-3/4" Equal Thread Length

600 Lb Holding Capacity, Vertical Handle, Manual Hold Down Toggle Clamp - 58° Handle Movement, 106° Bar Opening, U-Bar, Flanged Base, Carbon Steel

3/8-16" UNC Thread, Uncoated, Stainless Steel Round Knurled Check Nut;3/8" Overall Height, 1" Head Diam, 3/4" Diam x 3/32" Base Height

4-3/4" Throat Depth, 19-11/16" Max Capacity, Standard Sliding Arm Clamp;2,200 Lb Clamping Pressure

2,400 Lb Capacity, Steel, 1/2-13, Lifting Eye Bolt - Fully Threaded, 4" Shank, 4" Thread Length, No Shoulder

5/8-11" UNC Thread, Uncoated, Stainless Steel Round Knurled Check Nut;1/2" Overall Height, 1-3/8" Diam x 3/8" Head Height, 1-1/8" Diam x 1/8" Base Height

12mm OAL, Steel, Headless Rolling Ball End Clamping Screw; 1,011 Lb Max Load, 3mm Ball Diam

4,000 Lb Capacity, Steel, 5/8-11 Thread, Fixed Lifting Eye Bolt - Fully Threaded, 2-1/2" Shank, 2-1/2" Thread Length, Shoulder

3/4-10 UNC Steel Right Hand Heavy Hex Nut;1-1/8" Across Flats, 41/64" High, Black Oxide Finish

3/4-10 UNC Alloy Steel Right Hand Heavy Hex Jam Nut;1-1/4" Across Flats, 27/64" High, Black Oxide Finish

5/16-18 UNC Alloy Steel Right Hand Heavy Hex Jam Nut;9/16" Across Flats, 13/64" High, Black Oxide Finish

3/8" Screw, 1010 Case Hardened Steel Standard Flat Washer 13/32" ID x 7/8" OD, 1/8" Thick, Black Oxide Finish

5/8-11 UNC Alloy Steel Right Hand Heavy Hex Jam Nut;1-1/16" Across Flats, 23/64" High, Black Oxide Finish

3/8-24 Thread, 7/8" Yoke Width, Carbon Steel, Tapped Yoke - 3/8" Hole Diam, 1-5/8" Hole Center to Neck, 11/16" Yoke Arm Height, 5/8" Neck Diam, 7/8" Neck Length, 2-1/2" OAL