Radial/Deep Groove Ball Bearing - Straight Bore, 12 mm ID, 32 mm OD, 10 mm Width, Double Sealed, Without Snap Ring

Radial/Deep Groove Ball Bearing - Straight Bore, 30 mm ID, 55 mm OD, 13 mm Width, Double Sealed, Without Snap Ring

Split Taper Bushing - H Series, 1.0000 in Bore, 2-1/2 in Flg OD, 1-1/4 in LTB

General Purpose Motor - 3/4 hp, 1800 rpm, 3 ph, 208-230/460 V, 56C Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 60 Hz, 1765 rpm Base, C-Face / Footless Mount, Continuous Duty

Quick Disconnect Bushing - SK Bushing, 1.4375 in Bore, 3.875 in Flg OD, 1.9375 LTB, Cast Iron Material

Coupling Sleeve - 4, JE, One Piece Solid, EPDM

Hi-Power® V-Belt - B Section, 21/32 in Top Width, 1 Strand, 63.0000 in Nominal Outside Length, Smooth

Groove System Coupling Fitting +[Part Type] - 3/4 in Coupling Size, Nitrile Body, Gasket

General Purpose Washdown Duty Motor (Painted) - 5 hp, 3600 rpm, 3 ph, 230/460 V, 184TC Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 60 Hz, 3470 rpm Base, C-Face / Foot Mount

Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 40 mm OD, 12 mm Width, Double Shielded, Without Snap Ring