V-Belt Pulley - A, B Belt Section, 2 Groove, Bushing Required Bore Size, 15.7500 in O.D., Split Taper Bushed, R1 Series Bushing, Cast Iron Material

Single Lip Oil Seal - Solid, 2.813 in Shaft Dia., 3.751 in OD, 0.438 in Overall Width, CRWH1 Design, Nitrile Rubber (NBR) Lip Material

MALE METRIC 24 DEGREE DIN SEAT

Radial/Deep Groove Ball Bearing - Straight Bore, 16 mm ID, 35 mm OD, 0.5669 in Width, Double Sealed, Without Snap Ring

Hydraulic Plug - Steel Body Material, Poppet Valve, 1/2 in NPTF, 3/4 – 14 Female Thread, 5075 psi psi, 1/2 in Body Size, Buna-N Seal

6410-S-16-12-O 16MORB-12FORB STRAIGHT SH

V-Belt Pulley - 3L, 4L, A Belt Section, 1 Groove, 1 in Bore Size, 5.4500 in O.D., Finished Bore, Not Required Series Bushing, Cast Iron Material

Split Taper Bushing - R1 Bushing, 1-11/16 in Bore, 5.3750 in Flg OD, 2.8750 in LTB, Steel Material

V-Belt Pulley - A, B Belt Section, 2 Groove, Bushing Required Bore Size, 4.3500 in O.D., Split Taper Bushed, P1 Series Bushing, Cast Iron Material

Mine Duty Drum - Crown Face, 16 in Dia., 20 in Face Width