Flagging Tape -

Single Reduction Right Angle Worm Gearbox - Single Reduction Reduction, 8:1 Ratio, 1.7500 in Center Distance, C-Face Quill Input, 0.8750 in Input Size, Solid Output, 0.8750 in Output Size, Left Hand Output, 140TC/180C Frame

Standard Duty Drum - Crown Face, 12 in Dia., 51 in Face Width

Bushing Bore V-Belt Pulley - 5V Belt Section, 3 Groove, 5.1 in Pitch Dia., 5.2 in O.D., Bushed, 1610 Series Bushing, Steel Material

Right Angle Worm Gear Speed Reducer - Single Reduction Reduction, 15:1 Ratio, 3.0000 in Center Distance, C-Face Quill Input, 0.8750 in Input Size, Hollow Output, 1.9375 in Output Size, Hollow Output, 56C Frame

Flange-Mount Ball Bearing Unit - 1 in Bore, 4-Bolt Flange Mount, Set Screw Locking, Cast Iron Housing Material, Non-Expansion Bearing (Fixed), Standard Duty, Triple-Lip Contact Seal Seal

AC Right Angle Gear Motor - 190:1 Ratio, 1/6 hp, 115 V, 1 ph, TENV (Totally Enclosed Non-Ventilated), 2.00 A - Full Load Current

Standard Wing Pulley - Crown Face, 12 in Dia., 51 in Face Width, XT Hub

General Purpose Motor - 1/3 hp, 1800 rpm, 1 ph, 110/220//115/230 V, 56 Frame, ODP (Open Drip-Proof) Enclosure, 50/60 Hz, 1425 rpm - 1725 rpm Base, Rigid Base Mount, Continuous Duty

Standard Wing Pulley - Crown Face, 10 in Dia., 26 in Face Width, XT Hub