Flat Cam Follower - Special Duty Metric CAMROL (SDMCF) Series, 60 Roller Dia, 35 mm Roller Width, 24 mm Stud Dia, Sealed, Bearing Steel Material

Flat Cam Follower - Special Duty Metric CAMROL (SDMCF) Series, 50 Roller Dia, 30 mm Roller Width, 20 mm Stud Dia, Sealed, Bearing Steel Material

1/8" Thick, Quattro Cross Section, Shore 65 - 75, -30 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.|Quattro cross-section shapes are four-lobed and feature a geometry with twice the number of sealing surfaces compared to standard O-rings. The ring is designed not to be able to twist and bend when the part moves since the cross section isn't round. They can perform at lower pressures than a standard O-ring increasing seal life.

1/8" Thick, Quattro Cross Section, Shore 65 - 75, -30 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.|Quattro cross-section shapes are four-lobed and feature a geometry with twice the number of sealing surfaces compared to standard O-rings. The ring is designed not to be able to twist and bend when the part moves since the cross section isn't round. They can perform at lower pressures than a standard O-ring increasing seal life.

Flat Cam Follower - Special Duty Metric CAMROL (SDMCF) Series, 80 Roller Dia, 45 mm Roller Width, 30 mm Stud Dia, Sealed, Bearing Steel Material

PowerGrip® 7784-1148 Manual Belt Tensioner - Steel Material

1/8" Thick, Quattro Cross Section, Shore 65 - 75, -30 to 250°F Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.|Quattro cross-section shapes are four-lobed and feature a geometry with twice the number of sealing surfaces compared to standard O-rings. The ring is designed not to be able to twist and bend when the part moves since the cross section isn't round. They can perform at lower pressures than a standard O-ring increasing seal life.

Flat Cam Follower - Special Duty Metric CAMROL (SDMCF) Series, 40 Roller Dia, 25 mm Roller Width, 16 mm Stud Dia, Sealed, Bearing Steel Material

GEZ 112 ESX-2LS

CG1-Z CDG1TN32TN-350Z-NW-M9PSDPC with 32 mm Bore Size