206 TC/CHL 6.000"ID 11.000"OD 6.000"FF STD A

Round Guide Rail - Standard Rail, Natural White, UHMW Insert, Stainless Steel Channel, 0.6700 in Wear Surface Width, 10.00 ft Overall Length

Angular Contact Bearing - 40 mm Bore, 90 mm OD, 23 mm Width, Open, 40 ° Contact Angle

Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 1.6250 in OD, 0.4375 in Width, Double Shielded, Without Snap Ring

Linear Shaft Seal - For Use With 162536, SSU16, SUPER16, S Series

Single Lip Grease Seal - Solid, 1.000 in Shaft Dia., 1.250 in OD, 0.125 in Overall Width, HM14 Design, Nitrile Rubber (NBR) Lip Material

Double Row Angular Contact Bearing - 40 mm Bore, 90 mm OD, 1.4375 in Width, Double Shielded, Without Snap Ring, 30 ° Contact Angle, C3

Rail Clip - Heavy Duty, 5/16 in Bolt Thread, 1.0000 in Bolt Length, Stainless Steel

Fluted Filter Media - For Use With 10 x 10 in Fan, PF 42500, PF 43000, PFA 40000, PF 42500 R, PF 43000 R, PFA 40000 R, White, Polyester Material

Single Lip Grease Seal - Solid, 1.125 in Shaft Dia., 1.375 in OD, 0.125 in Overall Width, HM14 Design, Nitrile Rubber (NBR) Lip Material