Radial/Deep Groove Ball Bearing - Straight Bore, 80 mm ID, 140 mm OD, 26 mm Width, Single Shielded, Without Snap Ring

Linear Guide Standard Ball Carriage Profile Rail - Series: LH, Flanged Block, 45 mm Rail Size, 139 mm Wide, Load Capacity: 81000 N

Motor - 2 hp, 1800 rpm / 1500 rpm, 3 ph, 460//220-240/380-415 V, 90L Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure

General Purpose Motor - 1 hp, 1200 rpm, 3 ph, 230/460 V, 145T Frame, OPSB (Open Slotted Band) Enclosure, 60 Hz, 1155 rpm Base, Foot Mount, Continuous Duty

Food Handling Belt - #3800 2-ply 100# Polyester White Urethane Bare x Bare

"Alignment Tool" - Alignment Tool

General Purpose Motor - 1 hp, 1800 rpm, 3 ph, 190/380//208-230/460 V, 56C Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 50/60 Hz, 1440 rpm - 1755 rpm Base, Horizontal / Footless Mount, Continuous Duty

Flex HeadTorque Wrench - Electronic, 1/4 in Drive, 1.1 to 22 ft-lbs, ±2 % - CW | ±3 % - CCW Accuracy

055106 P2B-SCAH-100 MOD

Inverter Duty Motor - 1/3 hp, 1800 rpm, 3 ph, 230/460 V, 56C Frame, TENV (Totally Enclosed Non-Ventilated) Enclosure, 60 Hz, 1780 rpm Base, C-Face / Foot Mount, Continuous Duty