Bearing Lock Washer - 3.5820 in ID, 4.9375 in Outside Dia., 4.2810 in Face Dia., W Series

Radial/Deep Groove Ball Bearing - Straight Bore, 80 mm ID, 170 mm OD, 39 mm Width, Open, Without Snap Ring

Angular Contact Bearing - 90 mm Bore, 190 mm OD, 43 mm Width, Open, 40 ° Contact Angle

Double Lip Oil Seal - Solid, 1.500 in Shaft Dia., 2.374 in OD, 0.313 in Overall Width, CRWA1 Design, Nitrile Rubber (NBR) Lip Material

General Purpose Motor - 2 hp, 1800 rpm, 3 ph, 230/460 V, 145TC Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 60 Hz, 1760 rpm Base, C-Face / Footless Mount, Continuous Duty

W Series Bearing Lock Washer - 3.582 in ID, 4.938 in OD, 4.281 in Face Dia., Steel Material

AN Series Bearing Lock Nut - 3.527-12 in Thread Size, 4-21/32 in OD, 4.281 in Face Dia., 11/16 in Width, Steel

Angular Contact Bearing - 70 mm Bore, 150 mm OD, 35 mm Width, Open, 40 ° Contact Angle

Angular Contact Bearing - 80 mm Bore, 170 mm OD, 39 mm Width, Open, 40 ° Contact Angle

Radial/Deep Groove Ball Bearing - Straight Bore, 35 mm ID, 80 mm OD, 21 mm Width, Open, Without Snap Ring